Email Us
track bed damping pad 01
track bed damping pad 02

Track Bed Damping Pad

The product structure of rubber track bed damping pad is a long cushion with a nail post structure on one side, and its flat plate part is composed of fabric reinforced rubber. It is mainly used in urban rail transit subway projects, laid between ballast beds and subgrade, and can be used as elastic support under gravel ballast beds, integral ballast beds and prefabricated ballast beds of subways, light rails and urban railways. The rubber track bed damping pad plays a role of vibration isolation and belongs to continuous support structure. Its typical laying and installation method is that the rubber track bed damping pad uses the whole track bed board as a vibration unit. It has the characteristics of large mass and small vibration amplitude, good vibration isolation performance, excellent fatigue resistance and easy installation and usage.


Contact Us

Indicators of Track Bed Damping Pad

Project

Unit

Rated Value

Remarks

Service Life

年Year

不小于60Not less than 60

-

Operating Ambient Temperature

-30℃~+70℃

-

Thickness

mm

30±1

No more than 20% change in thickness during service life

Static Fundamental Modulus

N/mm3

0.016~0.022

1.8kN~9.0kN Loading Load:1.8kN~9.0kN

Dynamic and Static Stiffness Ratio

-

≤1.2

Dynamic and static fundamental modulus ratio

Fatigue Performance

%

3% Static fundamental modulus, thickness change no more than 3%

Loading Load: 1.8kN~9.0kN; Loading Frequency: 4±1Hz; 15 million times

Maximum vertical dynamic displacement of the roadbed when the train passes by

mm

≤3

-


Other Track Bed Damping Pad